CORONAVIRUS UPDATE - CLICK HERE
руб - RUB
divebay_ru
-7%

Больше изображений

  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)
  • XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)

XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)

Добавить в желаемое

Наличие Проверьте Ниже

Особая цена: 30 645,81 руб

Обычная цена: 32 893,69 руб

Did you find the same product with a cheaper price? Let us know!

Краткое описание

The Classic Twinset Wing (with Stainless Steel Backplate) that Familiar in Looks, Innovative & Functional in Use. Designed to Exceed the Expectations of Demanding Tec Divers

* Обязательные поля

Особая цена: 30 645,81 руб

Обычная цена: 32 893,69 руб

XDEEP HYDROS 40/50 DIR Full Set (Steel Backplate)

Familiar in looks, innovative and functional in use

Whilst the HYDROS system might be easily recognisable, every element has been addressed to ensure an enhanced diving experience. Building all of the elements around a carefully calculated geometry, we significantly improved stability in the water.

XDEEP eliminated the ‘dead zones’ that trap air, increasing drag or affecting buoyancy. They ensured you have great access to your valves through a careful top wing design. Holding flat and expert trim in this wing is made easy, whether you are a new technical diver or have hundreds of decompression dives and want the security and comfort of the best system possible.

 

Trim and Stability to meet the most critical eye

Diver trim position

Learning how to hold good trim and a stable position in the water is often the hardest skill for a new technical diver. For an experienced technical diver they want their 

equipment to help, not be something they have to compensate for. The HYDROS was designed so that the buoyancy in the wing perfectly matches the centre of gravity of the gas in your twinset.

Irrespective of the inflation level of the wing, or the remaining cylinder pressure, the system trim will not change during the dive.

 

Valve Shutdowns – faster and safer

Technical diving valve shutdown

The last thing you want between you and your valves is a flap of wing that slows down your response to a problem. 

Shutdowns and valve management have been improved by reducing the volume of the wing in the valve area, and through the area where you want to route your hoses.

Its easier to configure a clean and tidy hose routing, leaving your valves clear and accessible.

 

Reduced drag but the same buoyancy

Drag double tank wing bladder

Smaller contour wings have less drag and a lower risk of entanglement. In classic twinset BCD designs if you reduce the contour of the wing, then you lose overall buoyancy.

Not in the HYDROS.

By minimizing the dead zone in the HYDROS from the central part of the bladder, we have reduced the overall wing contour and kept all the buoyancy you need. A bit of lateral thinking!

 

Comfortable and high up at the surface

Surface trim double tank bladder

It is a challenge to design a wing that holds you in perfectly flat trim underwater, yet holds you upright and high at the surface. Most designs want to push your face back underwater. In the HYDROS the design ensures that the majority of the wing and therefore buoyancy is kept beneath the surface.

Even loaded with two full stages and gear for a deep technical dive, HYDROS will hold you high and comfortable out of the waves.

 

CUSTOMISE YOUR HYDROS TO YOUR EXACT NEEDS

When ordering the full set, you can choose the size of wing, the inflator length and the type of backplate that meets your specifications. The full system will come assembled, configured and ready to dive.

 

Lift to match your needs

Two robust and reliable wings are available in the HYDROS product range. You can choose and configure the wing according to the dives you are doing and your own build and preferences.

The HYDROS 40 has 18 kg (40 lbs) of lift and is perfect for twin 7 litres or twin 12’s and a single stage.

The HYDROS 50, with its 22 kg (50 lbs) of lift, suits both the larger diver and more demanding technical dives that need larger capacity main cylinders and multiple stages.

HYDROS 40/50 DIR full set includes (depending on selection from drop down list):

  • HYDROS 40lb/18kg or 50lb/22kg wing bladder
  • Stainless steel backplate
  • 56cm Inflator hose

TECHNOLOGY

Advanced materials technology utilised in innovative design has been the key to XDEEP’S success. Using only the very best materials sourced from Germany and USA and designed and built in Europe, we will never compromise on quality.

CORDURA® is a widely known brand of polyamide fabrics of the highest resistance resulting from special weave structure and weaving method. The outer side of CORDURA® fabric is coated with Teflon aperture, which ensures very high resistance to abrasion. The inner side of the CORDURAŸ fabric we use is coated with a layer of polyurethane. 

The XDEEP dive gear are only made of CORDURA®Ÿ fabric produced in Germany in compliance with the highest quality standards of INVISTA company. 

CORDURA® is a registered trademark of INVISTA company for resistant textile fabrics. 

 


 

Anti-bacterial Coating

The moisture inside the BCD or a buoy creates perfect conditions for the development of different types of microorganisms, including fungi and pathogenic bacteria. 

By removing water from the BCD after the dive, like it or not you form some aerosol which is filled with numerous bacteria. And from there it is very easy for them to get to your lungs and sinus. 

Many divers have already experienced how bothersome it is, when chronic problems with upper airways deprived them of diving for many long months. 

In order to reduce the risk, the inner shell in all XDEEP buoyancy compensators and SMBs contains special agent preventing the development of bacteria and fungi. The agent, safe for people, permanently adheres to the shell, so it does not rinse off and protects your dive gear during the entire period of use.

 


 

TPU 0.215mm Coating

To provide water tightness of the bladder in each wing the bladder material is coated with a special outer shell made of thermo-weldable polyurethane, during the production. It enables welding the bladder consisting of two parts and filling it with air. 

Its parameters and quality translates directly into your safety and durability of the BCD. We can say with no exaggeration that it is one of the most essential parts of each wing and diving buoy. 

In general, in wings and jackets shells of thickness from 0.08 mm to 0.2 mm are applied. In xDEEP buoyancy compensators we use materials coated with as much as 0.215 mm-thick TPU shell. The shells of higher thickness are more resistant to any damage that thinner shells. Consequently, it provides better safety of use.

 


 

"K" type Inflator

K-type inflator used as a standard type of inflators in all our buoyancy compensators is a balanced piston type inflator, which enables precise adding of the gas to the buoyancy compensator. 

The body of the inflator is made of POM-H poliacetal of very high mechanical durability and 100% resistance to salt water.The seat of the valve is made of metal and therefore the inflator is definitely more resistant to freezing than other inflators made completely of plastic. All metal parts of the inflator are made of top quality alloys resistant to salt water. 

The inflator is equipped with the most popular type of medium pressure hose connection so there are no problems with its incompatibility with the first stage hose. The material retains very high mechanical resistance and flexibility both in low winter temperatures and in tropical heat.

 


 

Ultrasonic Welding

Welding of some elements in the dive gear, such as reinforcement of valve seats, requires precise heating-up of the joint without heating-up the entire element. The said requirement is satisfied only by the state-of-the-art welding method, i.e. ultrasonic welding. 

It involves introducing sound waves of over 20KHz frequency to the fabrics to be joined together using sonotrode (picture nearby). At the junction of two fabrics the mechanical energy is converted into heat and pressure, which results in welding the fabrics. The heat is generated point-wise only at the junction of the fabrics to be joint together, which as a result makes it possible to avoid harmful heating of the entire fabric. 

The elements of our SMBs and diving BCDs are welded with the use of specialized numerically controlled welding machine and instrumentation specially constructed for the said purpose. 

The process guarantees very precise control of energy transferred to the fabric providing solid and repeatable welds.


 

HF Welding

Welding is one of the stages in the production of BCDs and diving buoys. In XDEEP we attach a lot of significance to the quality of the said process since durability and weld resistance exert great impact on your safety. 

From among several different welding technologies, we have selected HF welding because of very high repeatability of parameters, homogeneity of welds and fully automatic process. 

The fabric is inserted between two electrodes and then the computer begins to control the welding process. The electrodes are connected to the source of high-frequency electric power, and a special controller strictly regulates the power and time of welding to obtain the top-quality weld. 

Thanks to such advanced technology and top-quality of fabrics used for production, XDEEP scuba gear is provided with lifetime guarantee on all welds.


 

Fabric Laser Cutting

The bladders in all xDEEP wings are cut with the use of specialized laser for cutting fabric. 

The computer-controlled machine equipped with high power laser cuts the shape of the bladder with an accuracy of one tenth of a millimetre with all necessary openings. The edge of the material at the cut is immediately protected against fraying during longer use.

 



Amann Serabond Thread

Serabond® is the top quality technical thread of Performance techX type, made of continuous polyester fibres and produced in Germany by Amann & Söhne GmbH & Co. KG, the leading company on the market of more than 150 years of tradition. 

Serabond thread used as a standard thread in XDEEP diving gear was specially designed for long years of operation in extreme marine conditions and is highly resistant to all types of factors which occur during diving at sea, including the impact of salt water, UV radiation and variable temperatures. 

Thanks to such reliable thread you can be sure that XDEEP diving gear will last for many years, regardless of the types of dives you are going to use it for. 

Serabond is a trademark of Amann & Söhne GmbH & Co. KG. 

 



Triple, Fully Trimmed Seams

Apparently, the seams which are of little importance, in the diving gear can cause a lot of trouble. We enormously care about the quality of the XDEEP diving gear. 

The XDEEP wings are provided with a triple seam, trimmed from inside, which protects the BCD against fraying of the material edges. Such solution increases the costs of the production but guarantees that the final product will be very resistant and durable.

 


 

CNC EDGE BEVELLING

The diving gear is rather expensive so it should be constructed so as to last for many years. The diving equipment parts include backplates and single tank adapters made of metal which sharp edges could cause wear through the outer shell of BCD or dry suit.

In XDEEP backplates and adapters all edges are additionally processed which involves cutting the edges at 45 degree angle using a special computer-controlled machine. The special robot precisely grinds all the edges with an accuracy of one hundredth of a millimetre.

Weekly Special Нет
Stocked Нет
Код продукта DT-H40/50-S2-CP
Производителю XDEEP
Gender Unisex
Тип товара BCD Set